Doncaster Farms: Solar, Battery and EV Under One Roof
Published by SEO Dons · Last reviewed April 2026
The biggest shift in farm renewables over the last three years is not a new technology — it’s the realisation that solar, battery and EV charger projects work better delivered together than apart. Doncaster farms running integrated installs are seeing both better outcomes and lower combined costs. This guide covers why and what 2026 looks like.
Why Integrated Beats Sequential
Three reasons:
-
Single electrical isolation — one DNO touch, one consumer-unit upgrade, one isolation event
-
Single scaffold — solar mount and high-level electrical work share access cost
-
Integrated commissioning — battery, inverter, EV charger and farm load all tuned together rather than retrofitted
Cost saving on a combined install vs three separate projects is typically 8–15%. The performance gain is harder to measure but real.
The Certification Stack
A Doncaster electrician or installer delivering solar + battery + EV legally needs:
-
NAPIT or NICEIC for general electrical
-
MCS for solar PV
-
MCS battery scope for storage
-
OZEV approval for grant-eligible chargers
2026 Combined Project Costs
-
30 kW solar + 20 kWh battery + dual EV charger: £52,000–£64,000
-
100 kW solar + 50 kWh battery + commercial EV bank: £140,000–£175,000
Choosing an installer in Doncaster
This site is an independent guide published by SEO Dons Ltd and names no installer. Whoever you shortlist for a farm in Doncaster: check them on the MCS register, ask for two farm references you can call, ask how they handle biosecurity and roof structure, and compare itemised written quotes against the DESNZ median of £1,262 per kW for 10–50 kW systems. Our guide to choosing a farm solar installer lists the twelve questions to ask.
Sequencing a Combined Project
Even with one installer, project sequencing matters:
-
Survey: roof structural assessment, electrical demand profile, load study
-
DNO application: G99 if above 11 kW
-
Solar install
-
Battery install (parallel where possible)
-
EV charger commissioning
-
Final commissioning and handover
FAQ
Can I add an EV charger to existing farm solar? Yes, but you’ll usually want a smart unit that reads solar production. Standard chargers don’t.
How long does the combined install take? 1–3 weeks typical for a 30–100 kW project.
Future expansion? Plan inverter and DNO capacity at first install. Adding capacity later usually triggers a fresh G99.
Ready to get a quote for your farm? Get a free quote study →